Rotary Seals - Ceetak
+44 (0)1234832200
enquiries@ceetak.com

Rotary Seals

We offer a variety of rotary lip seal design configurations based on the type of service, speed, pressure and dynamic run-out required in individual applications.

Products
Manufactured in a variety of profiles and seal lip configurations, from 4 mm to 800 mm internal diameter.
Materials
Wide variety of case materials and polymer based lip materials for all application parameters.
Manufacturing
Rubber shaft seals, moulded or knife-trimmed sealing lip, PTFE inlays, full PTFE lip seals, metal cased or spring energised.
Engineering & Design
Complete seal design service from experienced application engineers using the latest 2D/3D design and simulation software

About Rotary Seals

The following types of rotary shaft seal profiles are a basic overview of our range:

• Springless Profiles                               • PTFE FlexiSeal Profiles
• Spring Loaded Profiles                        • PTFE FlexiLip Seal Profiles
• Dual Spring Loaded Profiles                • PTFE FlexiCase Seal Profiles
• Medium Pressure Profiles                   • V-Ring Profiles
• Cassette Seal Profiles                          • Elastomer Seals with PTFE Inlaid Lip

Materials

Our rotary shaft seals with elastomeric based lips include Nitrile (NBR), Fluorocarbon (FKM), Carboxylated Nitrile (XNBR), Hydrogenated Nitrile (HNBR), Ethylene Propylene (EPDM), Polyacrylate (ACM), Silicone (VMQ) and Neoprene (CR).

There are various different casings available for rotary lip seals; most common include carbon steel and stainless steel.

Depending on application criteria, other case materials include aluminium, zinc-plated cold rolled steel and Hastelloy®. Springs in stainless steel can also be provided.

PTFE rotary seals are suitable for applications with enhanced speed and pressure parameters, and are available in a range of PTFE materials using engineered fillers to optimise the shaft and seal life, reduce heat generation and prevent leakage.

Overview

About Rotary Seals

The following types of rotary shaft seal profiles are a basic overview of our range:

• Springless Profiles                               • PTFE FlexiSeal Profiles
• Spring Loaded Profiles                        • PTFE FlexiLip Seal Profiles
• Dual Spring Loaded Profiles                • PTFE FlexiCase Seal Profiles
• Medium Pressure Profiles                   • V-Ring Profiles
• Cassette Seal Profiles                          • Elastomer Seals with PTFE Inlaid Lip

Materials

Our rotary shaft seals with elastomeric based lips include Nitrile (NBR), Fluorocarbon (FKM), Carboxylated Nitrile (XNBR), Hydrogenated Nitrile (HNBR), Ethylene Propylene (EPDM), Polyacrylate (ACM), Silicone (VMQ) and Neoprene (CR).

There are various different casings available for rotary lip seals; most common include carbon steel and stainless steel.

Depending on application criteria, other case materials include aluminium, zinc-plated cold rolled steel and Hastelloy®. Springs in stainless steel can also be provided.

PTFE rotary seals are suitable for applications with enhanced speed and pressure parameters, and are available in a range of PTFE materials using engineered fillers to optimise the shaft and seal life, reduce heat generation and prevent leakage.